atomichaggis Skrevet January 26, 2008 Forfatter Rapporter Share Skrevet January 26, 2008 Den Backwindersnella du har bestilt er nok den samme som jeg har. Ser at laksesnella ikke er helt lik min (sjøaure), vet du hvilken størrelse den leveres i..??? The guidewinder Salmon is listed as 6/7/8 (wf8 + 175yds of 20lb). Although it has salmon reel stylings it is too small for a two handed rod and would suit a single handed rod I'm told. Looks fairly wide and mid arbor to me... I should have asked the dimensions of it. They are selling for 3,800 NOK... I've never heard of the reel nor anyone who owns one... it's either the ultimate collectors item or the ultimate lemon. Str Large looks are decieving... it's a little un. Svar på innlegget Lenke til kommentar Del på andre sider More sharing options...
Gismervik Skrevet January 26, 2008 Rapporter Share Skrevet January 26, 2008 Laksesnella kan ikke være så mye større enn den du bestilte fra UK, passer nok på enhånds stenger som du skriver. Svar på innlegget Lenke til kommentar Del på andre sider More sharing options...
atomichaggis Skrevet January 26, 2008 Forfatter Rapporter Share Skrevet January 26, 2008 I think its just wider on the spool and possibly thicker all over... looks a little bit 'tank' like. Looking through old websites I read that they intended to upgrade the braking on the salmon model so maybe there are some internal differences. I found another backwinder reel on an american site. Its a backwinder 'big game' reel... seriously ugly though! Svar på innlegget Lenke til kommentar Del på andre sider More sharing options...
StåleG Skrevet January 26, 2008 Rapporter Share Skrevet January 26, 2008 Jeg har en sånn liggende: Den er jo veldig pen Svar på innlegget Lenke til kommentar Del på andre sider More sharing options...
atomichaggis Skrevet January 26, 2008 Forfatter Rapporter Share Skrevet January 26, 2008 It's OK... but it's too understated and minimal for my taste. Svar på innlegget Lenke til kommentar Del på andre sider More sharing options...
ThorEH Skrevet January 26, 2008 Rapporter Share Skrevet January 26, 2008 Then I'd recommend mine... Loop Evotec LW - but I think it may be named Danielsson now.. Yes.. Svar på innlegget Lenke til kommentar Del på andre sider More sharing options...
atomichaggis Skrevet January 26, 2008 Forfatter Rapporter Share Skrevet January 26, 2008 Then I'd recommend mine... Loop Evotec LW - but I think it may be named Danielsson now.. Yes.. I had a look at one (Danielsson type) in Baardsens this morning... I think there is a difference in the finish between that and the loop . I'd have probably gone for a troutseeker over the evotec due to the considerable weight difference... tho the sealed bearing hub might be worth the extra weight in the long term. I've ordered a backwinder now so providing customs don't spoil my fun thats what will be sitting on my new rod Svar på innlegget Lenke til kommentar Del på andre sider More sharing options...
atomichaggis Skrevet January 29, 2008 Forfatter Rapporter Share Skrevet January 29, 2008 Thanks for all the input, got plenty of inspiration for my next new reel which is more affordable as Backwinder came today, straight to postbox, marked as a gift, no customs hassles Svar på innlegget Lenke til kommentar Del på andre sider More sharing options...
Espen Ørud Skrevet January 29, 2008 Rapporter Share Skrevet January 29, 2008 Sier bare GRATTIS! Thor - hva er alt det rusket i midten på de snellene - er ikke det bare i veien? Hvorfor ha masse pynt og greier midt i snellen når Backwinder tydelig viser at det ikke er nødvendig! Svar på innlegget Lenke til kommentar Del på andre sider More sharing options...
atomichaggis Skrevet January 30, 2008 Forfatter Rapporter Share Skrevet January 30, 2008 Cheers! Seriously cool piece of kit it is too... so much better without all that mess in the middle. Svar på innlegget Lenke til kommentar Del på andre sider More sharing options...
Wiggy Skrevet February 1, 2008 Rapporter Share Skrevet February 1, 2008 I'm not sure as to how much you paid for your backwinder, but I just noticed this on another forum..... http://www.flyforums.co.uk/showthread.php?t=19067 Svar på innlegget Lenke til kommentar Del på andre sider More sharing options...
atomichaggis Skrevet February 1, 2008 Forfatter Rapporter Share Skrevet February 1, 2008 I'm not sure as to how much you paid for your backwinder, but I just noticed this on another forum..... http://www.flyforums.co.uk/showthread.php?t=19067 Same same... trout mark II £125 and seatrout mark I £150 from the shop i got mine. Svar på innlegget Lenke til kommentar Del på andre sider More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.