atomichaggis Skrevet February 22, 2008 Rapporter Share Skrevet February 22, 2008 I need to tie me some end tackle and prolly buy some bits n' pieces for my trip up north in the spring and could use a few pointers from those in the know. Use of crimps on heavy boat rigs: Yes or No? I quite like crimps and don't like knotting heavy mono but it seems like a possible weak point to me and all the heavy rigs I've seen on the forum seem to be knotted, could use some advice. Halibut bait rig: Boom or Paternoster? Halibut hooks: J or circle? Jigs for Halibut: suggestions? Tips, Tricks, Pics appreciated too (not just for halibut). Svar på innlegget Lenke til kommentar Del på andre sider More sharing options...
atomichaggis Skrevet March 13, 2008 Forfatter Rapporter Share Skrevet March 13, 2008 Help! What size swivels will pass to halibut fishing in Tromsø? what knots to use on 1.8mm mono? Svar på innlegget Lenke til kommentar Del på andre sider More sharing options...
LasseB Skrevet March 13, 2008 Rapporter Share Skrevet March 13, 2008 what knots to use on 1.8mm mono? Get your self a swager and a handful of double barreled crimps in right dimension. Svar på innlegget Lenke til kommentar Del på andre sider More sharing options...
Havengel Skrevet March 13, 2008 Rapporter Share Skrevet March 13, 2008 (endret) No problems using crimps as long as you make sure to burn the free ends of the mono and have a proper crimping tool. Crimping is more common than knotting in BG-fishing down south. The reason it's less used here is quite simply lack of good crimps in the stores. Bought mine from Veals, works exellent. Swivels: Søvik size 1/0 and 3/0 Owner 6-4/0 Sølvkroken Extreme Ball bearing swivels test strength more than 50 kg Use strong split rings instead of snaps. Endret March 13, 2008 av Havengel Svar på innlegget Lenke til kommentar Del på andre sider More sharing options...
atomichaggis Skrevet March 13, 2008 Forfatter Rapporter Share Skrevet March 13, 2008 (endret) Get your self a swager and a handful of double barreled crimps in right dimension. More shopping required then... I've only got round section crimps and small point to cup crimpers. I dont dare use them on heavy gear. No problems using crimps as long as you make sure to burn the free ends of the mono and have a proper crimping tool. Crimping is more common than knotting in BG-fishing down south. The reason it's less used here is quite simply lack of good crimps in the stores. Bought mine from Veals, works exellent. I noticed that crimps are a bit on the scarce side here. I don't mind having a go at some knots if anyone has some dependable knots they've tried out on big fish. Not that a big fish is guaranteed but I'd hate to lose one to a lousy connection. Cheers! Endret March 13, 2008 av atomichaggis Svar på innlegget Lenke til kommentar Del på andre sider More sharing options...
LasseB Skrevet March 13, 2008 Rapporter Share Skrevet March 13, 2008 I buy double barreled crimps from www.leadertec.com in USA, and my swager is from Har-Lee Rod. Everything from their Ebay shops. Svar på innlegget Lenke til kommentar Del på andre sider More sharing options...
Vilhelm Skrevet March 13, 2008 Rapporter Share Skrevet March 13, 2008 Sølvkroken Extreme Disse suger ape (hører du Trond). De roterer ikke ved belastning. Styr unna! Selv bruker jeg owner og noname svivler fra ebay og de duger så det holder. Ellers er det ingen problem å knyte tykk mono med uniknuten. Svar på innlegget Lenke til kommentar Del på andre sider More sharing options...
atomichaggis Skrevet March 13, 2008 Forfatter Rapporter Share Skrevet March 13, 2008 Is there no Norwegian stores that have swagers? Svar på innlegget Lenke til kommentar Del på andre sider More sharing options...
Vilhelm Skrevet March 13, 2008 Rapporter Share Skrevet March 13, 2008 (endret) I guess you can buy mustad swagers from those who supply mustad equipment. Endret March 13, 2008 av Vilhelm Svar på innlegget Lenke til kommentar Del på andre sider More sharing options...
atomichaggis Skrevet March 13, 2008 Forfatter Rapporter Share Skrevet March 13, 2008 Disse suger ape (hører du Trond). De roterer ikke ved belastning. Styr unna! Selv bruker jeg owner og noname svivler fra ebay og de duger så det holder. Ellers er det ingen problem å knyte tykk mono med uniknuten. I know they are a little bit sticky, I love their snaps for lighter fishing tho. Six turns in 1.8mm... thats gonna be tricky. Svar på innlegget Lenke til kommentar Del på andre sider More sharing options...
Vilhelm Skrevet March 13, 2008 Rapporter Share Skrevet March 13, 2008 Six turns in 1.8mm... thats gonna be tricky. You don't need more than three Svar på innlegget Lenke til kommentar Del på andre sider More sharing options...
atomichaggis Skrevet March 13, 2008 Forfatter Rapporter Share Skrevet March 13, 2008 Is it worth burning the tag end as well? Svar på innlegget Lenke til kommentar Del på andre sider More sharing options...
Vilhelm Skrevet March 13, 2008 Rapporter Share Skrevet March 13, 2008 Is it worth burning the tag end as well? Off course. At least it won't do any harm Svar på innlegget Lenke til kommentar Del på andre sider More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.